How to Make Your Black Converse Black Again

Download Article

Download Article

A lot of people love Converse sneakers, and for skilful reasons. They are comfortable to habiliment, and they go with only about annihilation. Best of all, they are easily customizable and a blank canvas for whatsoever creative person. The fabric parts can exist colored with markers, paints, or fabric dyes. The rubber parts can exist colored with markers.

1. one

   Start with a clean shoe. The best Converse to work on are brand new. If you can't get new ones, you volition demand to clean the ones yous already own. This will help the ink stick and show upward ameliorate. Wipe down the rubber parts with a cotton ball soaked in rubbing booze. Wipe downwards the textile parts with a damp towel. Let the shoe dry before moving on.

   • Nigh markers are translucent, and volition show upwardly best confronting a white shoe. If you are going to buy a new pair of Converse, endeavour to get white ones.
   • If you lot are going to color the entire shoe, remove the shoe laces. Y'all can even color those ones too.

2. 2

   Become some permanent markers or material markers. Permanent markers will work on all parts of the shoe. Because they are translucent, they will show up best against white Converse. Fabric markers will simply piece of work on the fabric office of the shoe. They may smear if y'all employ them on the prophylactic part.

   • Make sure you get the right blazon of fabric marker. If your shoe is colored, get a cloth marker intended for nighttime or colored fabric. If your shoe is white, you can use any blazon of fabric marker.

   Advertizement

3. iii

   Come upward with a design, and practice it on a canvass of paper or scrap of cloth. In one case you start coloring your shoe, it will be difficult to erase any mistakes. Sketch out your design on a sheet of paper or scrap of fabric, then color it in using the markers. Effort simple designs, such as lightning bolts, hearts, and stars. You can as well try geometric designs too.

   • If you are going to color the rubber parts, practice on a sail of paper.
   • If yous are going to colour the textile parts, endeavor to practice on a scrap of sheet, linen, or cotton fiber textile. The texture will give you a feel for what information technology is like to color on Converse.

4. iv

   Sketch your design on the shoe using a pencil. If your shoes are white, attempt to sketch lightly so that the pencil doesn't bear witness through. If your shoes are dark, use a white colored pencil instead.

5. 5

   Colour in your design, starting with the lightest colors outset and finishing with the darkest. Depending on the blazon of mark yous are using, you lot may need to await for the ink to dry before moving onto the next colour. Don't start with the darker colors. If you do, the ink will smudge and bleed into the lighter colors and brand them muddy.

   • If you lot are using cloth markers meant for colored fabrics, milk shake it first, then tap the tip on a apartment surface. This will help become the ink into the felt tip. The ink will gush out, so don't exercise the tapping part on your Converse.

6. vi

   Expect until the ink dries before adding the outlines, if desired. The outlines are non necessary, but they can assistance make your work stand out some more. Attempt to use thicker lines on the main/larger shapes, and thinner lines on the smaller shapes and details.

7. vii

   Spray the fabric part of the shoe with a shoe sealant or a waterproofing spray. ^[i] You can too use a spray-on acrylic sealer. Whatever you cull to use, make sure that it is matte, or your shoes will end up shiny. This will help protect your work and get in last longer.

   • You practise not need to spray the rubber parts, if you colored them. Go on in mind that the designs will wear off of the condom parts on their ain the more than yous vesture your shoes.

8. 8

   Wait until the sealer dries before putting the laces dorsum in and wearing your shoes. Keep in mind that even with the sealer, your work will however be delicate. Article of clothing your shoes with care and endeavor to avoid getting them wet or muddy.

9. 9

   Finished.

   Advertisement

1. 1

   Take out the shoe laces and cover the condom parts with masking tape. This method will but piece of work on the material parts of your shoe. Material paint and acrylic paint volition non stick to prophylactic for very long. If you'd like to color the prophylactic parts, you will need to use permanent markers.

   • If you are just painting the sides of the shoe, you exercise not need to remove the shoe laces.

2. 2

   Come up with a design, and do information technology on a sheet of paper or scrap of fabric. One time you start painting your shoe, it will be difficult to erase any mistakes. Sketch out your design on a sail of newspaper or scrap of fabric, then color it in using acrylic or material paint and some sparse paintbrushes.

   • Cotton, linen, or sheet material volition give you lot the best feel for what information technology is like to work on Antipodal. Paper volition do in a pinch, all the same.
   • If your pigment is too thick, thin information technology out with some water.

3. iii

   Sketch your design on the shoe using a pencil. Press lightly, and so that the pencil doesn't show through once the paint dries. If your shoe is a very dark color, utilize a white color pencil instead.

   • Simpler designs, such as stripes, stars, and hearts will look the all-time.
   • If yous similar cartoons or comics, consider painting your favorite grapheme.

4. 4

   Fill your design in with paint primer if you are using acrylic paint. This will aid your colors evidence upwards improve and make them concluding longer. Let the paint primer dry before you move on to the next step.^[2]

   • If you are using fabric paint, yous don't demand to utilize paint primer.

5. v

   Colour in your design starting with the largest shapes first. Pigment the edges first, then fill the shape in. If you want to add any details, wait until the paint dries. For example, if you want to paint a ladybug, paint the entire bug blood-red first. Add together the spots afterwards the cerise paint dries. Keep in mind that some colors, such as yellow, will need several coats before they show upwards well.

   • If you want the outline to be another color (like black) wait until the very end.
   • If you brand a error, await for the pigment to dry, and then paint over it.

6. six

   Wait for the paint to dry before you do the outlines. You can do the outlines using a thin, pointed paintbrush or a black permanent marking.

7. 7

   Spray the shoe with a shoe sealant or a waterproofing spray. You can also use an acrylic spray sealer. Whatever you determine to use, make certain that it is matte, or your shoes will exist shiny. The sealer will protect your pigment piece of work and help information technology concluding to longer.^[three]

8. 8

   Remove the masking tape once the sealer dries, and put the laces back in. Your shoes are at present set up to clothing. Keep in mind that even with the sealer, your work will be frail. Try to avoid wetting your shoes soaked or muddy.

   Advert

1. 1

   Cull a white or cream-colored shoe. Dye is translucent. It adds color to whatever color is already there. For example, if you tried to dye a pair of blue shoes carmine or pink, y'all'll end up with purple. Y'all as well cannot dye shoes a lighter color.^[4] You can, yet, dye whatever color of shoe black.

2. two

   Remove the shoe laces, and cover the rubber soles and toe with petroleum jelly or masking tape. This will protect the rubber from picking up the dye.^[v] If you want to dye the laces besides, you volition notwithstanding desire to accept them out; you will dip them into the dye bathroom along with the shoes. This volition help them dye more evenly.

3. 3

   Fill a large bucket with hot water, and stir in 1 loving cup (225 grams) of salt and ane tablespoon (xv milliliters) of laundry detergent. Make sure that the saucepan is deep enough to fit your shoe.

   • The salt and laundry detergent will aid make the dye brighter.^[six]

4. 4

   Prepare your dye, and then add it to the bucket. Each company may be a lilliputian dissimilar, so follow the directions on your bottle or bundle. In general, liquid dyes do not need whatsoever preparation. If you lot are using powdered dye, you will demand to dissolve it in ii cups (475 milliliters) of hot water starting time.^[7]

5. 5

   Dunk the shoes into the saucepan. If your shoes float to the top, you lot will need to weigh them downwardly with something heavy. You tin apply glass jars or bottles, or fifty-fifty sticks. If you don't practise this, they will float to the top and your dye job volition be uneven.

   • Some people find that soaking the shoes in warm h2o first helps the dye soak in better and more evenly.^[viii]
   • Dye can get messy. Consider wearing some plastic gloves to protect your hands from getting stained.^[9]

6. 6

   Go out the shoes in the dye bath for xx minutes. This will give the dye enough time to soak into the textile.

7. 7

   Take the shoes out, and rinse them with water until the water runs clear. Apply warm h2o first to set the dye, and then common cold h2o to get rid of the excess dye.^[ten] Exist sure to get the inside of the shoes too.

8. 8

   Wait 5 minutes, then rinse the shoes again. This is to get rid of any concluding traces of dye. Remember to rinse the inside of the shoes every bit well.

9. 9

   Set the shoes downward on some newspaper and let them dry overnight. If you tin can, set them out in a sunny spot. This will help them dry out faster. If yous don't have any newspaper, you tin can use an old towel or even a newspaper bag instead.

10. 10

    Remove the tape or petroleum jelly. If any dye leaked onto the shoes, you can remove it using rubbing alcohol or a bleach pen.^[xi] Yous can also try a magic eraser or a paste made from equal parts of baking soda, water, and vinegar.^[12]

    • If yous are using a bleach pen, leave the bleach on the rubber parts for x minutes, and then wipe it off with a damp fabric. Be conscientious non to become any bleach on the fabric role.^[13]

11. 11

    Toss the shoes into the dryer for ten to xv minutes. The oestrus will help set the dye further.^{[14] [fifteen]} It volition also help the shoes end drying, if they are still a little clammy.

12. 12

    Put the shoe laces back in. Your shoes are at present gear up to wear.

    Advertisement

Add New Question

• Question

  Can I dye pinkish Converse to tiffany blueish? What colour would exist best to use?

  

  Y'all would have to first bleach them to remove the pinkish colour, so mix a light blue dye to use.

• Question

  I want to colour the mid-soles with blackness. Would a Sharpie piece of work, or would paint piece of work better?

  

  Sharpie is less fourth dimension consuming and works nigh as well equally pigment. If yous have the fourth dimension to wait for the paint to dry out and also have black paint, then painting would exist meliorate.

• Question

  Tin can I use pink sneakers instead of white?

  

  Yeah, but if you are using dye or markers, yous will exist putting the color on top of the pinkish. So if you lot use blue dye, the shoes will exist a shade of regal.

• Question

  Can I use Crayola washable markers and seal information technology with waterproof fabric spray?

  

  I wouldn't advise that, as Crayola washable markers aren't meant for textile. If you are going to use markers, use cloth markers.

• Question

  Can I dye my dark bluish Converse light blue?

  

  Yes, and you should be able to do that by bleaching them just a little flake and so that the colour gets lighter (simply doesn't disappear completely).

• Question

  How practice I change my Antipodal from white to blackness?

  

  If you are using pigment or fabric markers, they just have to be black. Yous tin can then follow the instructions in the commodity on how to dye your shoes.

• Question

  Can I dye regal Converse black?

  

  Aye. Just comprehend the bottom condom with tape, to protect it from the color, then paint or color them equally shown in the above directions.

• Question

  Could I dye light regal Converses back to the same color if they were bleached?

  

  If yous bleached the whole affair, then you lot could utilise any color of your choice. But if there was only a small spot that was bleached, I would recommend colour matching it so it is the same color again. Besides, taping the parts you don't want to be bleached would be a good thought.

• Question

  Is in that location a way to make faded Converse black once again without dye?

  

  Yes, use a Mr. Sketch marker and color the whole shoe. The results should be astonishing merely do use something to seal the color, and practice not wear them on rainy days.

• Question

  How exercise I turn my Converses clear white?

  

  You lot can't plow them clear, just y'all can brand them a pretty bright white if you employ bleach.

Encounter more answers

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advertisement

• After dyeing your shoes, consider painting or drawing some designs on top of them. Use black permanent or fabric markers for delicate designs, and black acrylic or cloth paint for bold designs.

• Simpler designs look best, especially at a distance.^[16]

• Markers will show up best against white shoes.

• Try using fabric stencils or stickers when painting your shoes. Leave the stencils or stickers on until the paint dries, so pull them off.^[17]

• Practice on sometime Antipodal you don't wear anymore, or on cheaper canvas shoes.

• Attempt to use paintbrushes with stiffer beard. The ones sold alongside the cloth paints in the fine art store are platonic.

Thanks for submitting a tip for review!

Advertisement

• If y'all colored the toe caps, know that the designs may fade over time.

Advertisement

Things You'll Demand

• Converse
• Rubbing alcohol (optional)
• Cotton wool ball (optional)
• Material markers or permanent markers
• Masking tape
• Pencil
• Shoe sealer, waterproofing spray, or acrylic sealer

• Converse
• Fabric paint or acrylic paint
• Paintbrushes
• Masking record
• Pencil
• Shoe sealer, waterproofing spray, or acrylic sealer

• Converse
• Masking tape or petroleum jelly
• Fabric dye
• Common salt
• Laundry detergent
• Hot water
• Bucket
• Bleach pen or magic eraser (optional)

About This Article

Article Summary X

If you want to add some color to your Converse, brand certain to get-go with brand new white sneakers, equally these will make your designs look brighter. Alternatively, you tin clean converse you already own with a damp towel. Before y'all start coloring on your shoes, pick out the permanent markers you want to utilize and sketch out a design on a slice of paper. When y'all've made a cool blueprint, outline information technology on your Converse in pencil, then colour it in with the markers. As y'all color, utilize light colors offset and let the ink dry before moving on to darker markers, or they might smudge. After your design has stale, spray the material with a matte shoe sealant or water-proofing spray to protect your work. For more than tips, similar how to paint your Converse, read on!

Did this summary help you?

Cheers to all authors for creating a folio that has been read 179,887 times.

Did this article help you?

chamberlainevending.blogspot.com

Source: https://www.wikihow.com/Color-Your-Converse

Share this post